HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

Table 48 Component Functions
FunctionComponent
Displays any unresolved alerts.Alert
Displays drive cage conditions that are not optimal.Cage
Displays if nodes have different dates.Date
Displays LDs that are not optimal.LD
Displays license violations.License
Displays Ethernet issues.Network
Displays node conditions that are not optimal.Node
Displays PDs with states or conditions that are not optimal.PD
Displays port connection issues.Port
Displays Remote Copy issues.RC
Displays issues with SNMP.SNMP
Displays failed tasks.Task
Displays inactive VLUNs and those which have not been
reported by the host agent.
VLUN
Displays VVs that are not optimal.VV
The following sections provide details about troubleshooting specific components.
Alert
Displays any unresolved alerts. Shows any alerts that would be seen by showalert -n.
Format of Possible Alert Exception Messages
Alert <component> <alert_text>
Alert Example
Component -Identifier- --------Description--------------------
Alert hw_cage:1 Cage 1 Degraded (Loop Offline)
Alert sw_cli 11 authentication failures in 120 secs
Alert Suggested Action
View the full Alert output using the IMC (GUI) or the showalert -d CLI command. Consult the
Alerts chapter in this manual for more information about the alert.
Cage
Displays drive cage conditions that are not optimal. Reports exceptions if any of the following do
not have normal states:
• ports
• drive magazine states (DC1, DC2, & DC4)
• Small Form-factor Pluggable (SFP) voltages (DC2 and DC4)
• SFP signal levels (RX power low and TX failure)
Troubleshooting Storage System Components 293