HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

License
Displays license violations. Returns information if a license is temporary, and if it has expired.
Format of Possible License Exception Messages
License <feature_name> "License is enabled on a trial basis"
License <feature_name> "License has expired"
License Example
Component -Identifier- --------Description-------------
License -- System Tuner License has expired
License Suggested Action
If desired, request a new/updated license from your Sales Engineer.
Network
Displays Ethernet issues for the Administrative and Remote Copy over IP (RCIP) networks.
• Check if the number of collisions is > 5% of total packets.
• Check for Ethernet errors and transmit (TX) or receive (RX) errors.
Format of Possible Network Exception Messages
Network -- "IP address change has not been completed"
Network "Node<node>:<type>" "Errors detected on network"
Network Example 1
Network -- "IP address change has not been completed"
Network Suggested Action 1
The setnet command was issued to change some network parameter, such as the IP address,
but the action has not been completed. Use setnetfinish to complete the change, or
setnetabort to cancel. Use shownet to examine the current condition.
cli% shownet
IP Address Netmask/PrefixLen Nodes Active Speed Duplex AutoNeg Status
192.168.56.209 255.255.255.0 0123 0 100 Full Yes Changing
192.168.56.233 255.255.255.0 0123 0 100 Full Yes Unverified
Network Example 2
Component ---Identifier---- -----Description----------
Network Node0:Admin Errors detected on network
Network Suggested Action 2
Network errors have been detected on the specified node and network interface. Commands such
as shownet and shownet -d are useful for troubleshooting network problems.
Troubleshooting Storage System Components 303