HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

manually removed with the IMC (GUI) or CLI with removealert or setalert ack. To display
system-initiated tasks, use showtask -all.
cli% showtask -d 6313
Id Type Name Status Phase Step
6313 background_command upgradecage -a -f failed --- ---
Detailed status is as follows:
2010-10-22 10:35:36 PDT Created task.
2010-10-22 10:35:36 PDT Updated Executing "upgradecage -a -f" as 0:12109
2010-10-22 10:35:36 PDT Errored upgradecage: Invalid option: -f
VLUN
Displays inactive Virtual LUNs (VLUNs) and those which have not been reported by the host agent.
Reports VLUNs that have been configured but are not currently being exported to hosts or host-ports.
Format of Possible VLUN Exception Messages
vlun host:<hostname> "Host <ident>(<type>):<connection> is not connected to a port"
VLUN Example
Component ---------Description--------- Qty
vlun Hosts not connected to a port 1
Component -----Identifier----- ---------Description--------
vlun host:cs-wintec-test1 Host wwn:10000000C964121D is not connected to a port
VLUN Suggested Action
Check the export status and port status for the VLUN and HOST with CLI commands such as
showvlun, showvlun -pathsum, showhost, showhost pathsum, showport, servicehost
list, etc. For example:
cli% showvlun -host cs-wintec-test1
Active VLUNs
Lun VVName HostName -Host_WWN/iSCSI_Name- Port Type
2 BigVV cs-wintec-test1 10000000C964121C 2:5:1 host
-----------------------------------------------------------
1 total
VLUN Templates
Lun VVName HostName -Host_WWN/iSCSI_Name- Port Type
2 BigVV cs-wintec-test1 ---------------- --- host
cli% showhost cs-wintec-test1
Id Name Persona -WWN/iSCSI_Name- Port
0 cs-wintec-test1 Generic 10000000C964121D ---
10000000C964121C 2:5:1
cli% servicehost list
List of inactive hosts:
Lun VVName HostName -Host_WWN/iSCSI_Name- Port Type
2 BigVV cs-wintec-test1 10000000C964121D 3:5:1 unknown
316 Troubleshooting