HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

Figure 38 Power Banks in the PDU
NOTE: For more information on PDUs and storage system configurations, see the HP 3PAR
StoreServ 10000 Storage Installation and Deinstallation Guide.
Battery Module Numbering
The HP 3PAR StoreServ 10000 Storage system include one or two battery compartments that hold
up to four battery modules each. The battery compartment is part of the node chassis and adjacent
to the node fan compartment. Battery module placement and numbering schemes may vary
according to the type of configuration. When facing the front of the storage system, battery modules
are numbered 0 through 3 from right to left and directly connected to the correlating controller
node. When two battery compartments are present, the battery modules in the upper compartment
are numbered 4 through 7 from right to left.
Understanding Component Numbering 39