HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

Figure 39 Battery Module Numbering
Controller Node Numbering
The HP 3PAR StoreServ 10000 Storage system may contain two, four, six, or eight controller nodes
per system configuration. The controller node chassis slots are located at the rear of the cabinet.
From the rear of the cabinet, component numbering starts with zero (0) at the bottom-left corner
and advances right and upward, refer to Figure 40 (page 41).
Use the following table as a guideline for loading controller nodes into the chassis:
Table 9 Controller Node Loading Order
Loading OrderController NodesSystem
0, 1210400
0, 1, 2, 34
0, 121010800
0, 1, 4, 54
0, 1, 2, 3, 4, 56
0, 1, 2, 3, 4, 5, 6, 78
The following shows the numbering and positioning of the controller nodes in an HP 3PAR StoreServ
10000 chassis:
40 Component Numbering for HP 3PAR StoreServ 10000 Storage