HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

Table 14 Controller Node LED Displays (continued)
IndicatesAppearanceLED
No Ethernet activity.Flashing green light
No Ethernet connection.No light
1000 MB/s modeSteady amber lightEthernet status
100 MB/s modeSteady green light
10 MB/s mode (or disconnected)No light
Fibre Channel Port LEDs
The Fibre Channel adapter in the controller node also contains Fibre Channel port LEDs (Figure 51
(page 52)).
Figure 51 4-Port Fibre Channel LEDs
Table 15 Fibre Channel Adapter LED Displays
IndicatesAppearanceLED
Wake up failure (dead device)No lightPort 1, 2, 3
Normal - link up at 2-4GBs/sSteady green light
Link down or not connectedFlashing green light
QLogic iSCSI Port LEDs
The QLogic iSCSI adapter contains two ports with one LED for each port.
52 Understanding T-Class Storage System LED Status