HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

Table 26 Controller Node LED Displays (continued)
IndicatesAppearanceLED
100 MB/s modeSteady green light
10 MB/s mode (or disconnected)No light
Fibre Channel Port LEDs
The Fibre Channel adapter in the controller node also contains Fibre Channel port LEDs:
Figure 65 4-Port Fibre Channel LEDs
Table 27 Fibre Channel Adapter LED Displays
IndicatesLED Appearance
Wake up failure (dead device)No light
Normal - link up at 2-4GBs/sSteady green light
Link down or not connectedFlashing green light
QLogic iSCSI Port LEDs
The QLogic iSCSI adapter contains two ports with one LED for each port.
Figure 66 iSCSI Adapter Port LEDs
Using the F-Class Component LEDs 67