HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

Table 28 iSCSI Adapter Port LED Displays
IndicatesLED Appearance
No connection or active link.No light
Link is established.Steady green light
Receiving or transmitting activity.Flashing green light
Emulex Fibre Channel Port LEDs
The Emulex Fibre Channel adapter in the controller node also contain Fibre Channel port LEDs.
Two port Emulex Fibre Channel adapters are only used in an F-Class Storage System (Figure 67
(page 68)).
Figure 67 Emulex 2-Port Fibre Channel LEDs
Table 29 Fibre Channel Port Status LED Displays (Emulex 2-Port Adapter)
Port StatusGreen LEDYellow LED
Wake-Up Failure (dead device)OffInternal Test Only
Normal - Link up at 1-4 GB/secOnInternal Test Only
Normal - Link DownSlow BlinkInternal Test Only
68 Understanding F-Class Storage System LED Status