HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

A blue illuminated lamp denotes that power is being supplied to a power bank. When the blue
lamp is not illuminated, the power bank is not receiving AC input.
Service Processor LEDs
The following describes the LEDs for the Supermicro and the Supermicro II Service Processor LEDs.
Supermicro Service Processor
The Supermicro Service Processor LEDs are located at the top of the service processor (Figure 70
(page 70)).
Figure 70 Supermicro Service Processor LEDs
Table 31 Supermicro Service Processor LED Displays
IndicatesAppearanceLED
Service processor is off.No lightPower
Service processor is on.Steady green light
No hard drive activity.No lightHard disk drive
Hard drive activity.Flashing amber light
Port is not connected.No lightNIC Port 1, 2
Port is connected.Steady green light
Network activity.Flashing green light
Service processor temperature is
normal.
No lightOverheat
Service processor temperature is
overheating.
Steady red light
Supermicro II Service Processor
Supermicro II Service Processor LEDs are located at the top of the service processor (Figure 71
(page 71)).
70 Understanding F-Class Storage System LED Status