HP 3PAR InForm OS 3.1.1 Messages and Operators Guide
Table 35 Controller Node LEDs (continued)
IndicatesAppearanceLED
The node is booting, or, in combination
with a blue service LED, the node is safe
to remove.
Rapidly flashing green light (three
times per second)
The node has joined the cluster but
there is a degraded component
Flashing amber light
associated with the node. A slow
flashing light means the node is part of
the cluster.
An error within the node.Steady amber light
The servicenode start command
was issued to illuminate the service LED
BlueHBA Service
or the HBA has failed and needs to be
replaced. If the LED is off, the HBA is
normal.
Controller Node Status Panel LEDs
The controller node LED status panel is located at the front of the system. The 10400 includes four
LEDs and the 10800 has eight LEDs. Each LED on the node-chassis panel should be identical to
the individual controller node status LED, as shown in the Node Status LED section of the Controller
Node LEDs table.
Figure 75 LED Status Panel on a 10400
Controller Node LEDs 77