HP 3PAR InForm OS 3.1.1 Messages and Operators Guide
6. Click OK.
7. Click OK in the Advanced TCP/IP Settings dialog box to finish configuring the LAN connection.
8. Initiate a SSH using PuTTy. Refer to “Using PuTTY” (page 91).
Using PuTTY
After you have configured LAN settings and established an Ethernet connection, use PuTTY to
initiate a SSH between the maintenance PC and the SP.
1. Go to the permanent location where you extracted putty.zip and double-click the putty.exe
file.
2. In the PuTTY Configuration dialog box that appears, type the SP IP address in the Host Name
(or IP address) box, click the SSH protocol button, then click Open (“PuTTY Configuration
Dialog Box” (page 91)).
Figure 90 PuTTY Configuration Dialog Box
3. If you are connecting to the SP for the first time, the PuTTY Security Alert dialog box appears.
Click Yes.
4. In the PuTTY main window, type your user ID and press ENTER then type your password and
press ENTER.
Connecting to the Service Processor 91