HP 3PAR InForm OS 3.1.1 Messages and Operators Guide

Logging into the SP Onsite Customer Care Interface (SPOCC)
After the Ethernet connection is configured, log in to the SPOCC interface using a supported Web
browser.
To log in to SPOCC using a Web browser:
1. Type the IP address of the SP in the Web browser and press ENTER.
NOTE: If you are using the crossover cable to the SP ETH1 (Int) port, use IP address
10.255.155.54.
2. On the Service Processor Login screen, click the Login button.
3. The Enter Network Password dialog box appears. Type your user name and password and
click OK.
NOTE: If you do not have a user name and password, contact your Authorized Service
Provider.
92 Power Off/On Procedures