HP 3PAR Management Console 4.5.1 Software User Guide

The Hosts Screen Detail Pane
The detail pane of the Hosts screen displays the following:
DescriptionColumn
The ID of the host associated with the selected port.Host ID
The name of the host system.Host Name
The domain the host is associated with (if any).Domain
The WWN of the port.WWN
The port location in Node:Slot:Port format.Port
Click the highlighted value under Host Name to display the Host Summary screen or the System
screen, depending on the connected device type.
Viewing Storage Settings and Configurations
The Storage Settings and Configurations section of the Peer Motion tree node contains nodes for
Hosts and Security & Domains.
Hosts Node
When you select the Hosts node in the Peer Motion tree, the Hosts and a Host Sets tabs display
in the Management Window.
Storage Settings and Configuration Hosts Screen
The Hosts screen displays source hosts and destination hosts side by side. The source system must
be connected for the source hosts screen in order to display.
The following information displays for both Source and Destination systems:
DescriptionColumn
The host name.Name
The domain (if any) the host is associated with.Domain
The host set (if any) the host is associated with.Set
The number of storage system ports associated with the host.Storage System Ports
The number of exported volumes on the host.Volumes Exported
The total size of the exported volumes (in GiB).Total Exported Size
Viewing Storage Settings and Configurations 271