HP 3PAR Online Import for EMC Storage Data Migration Guide

13. To start the utility, double click “HP 3PAR Online Import Utility for EMC Storage” shortcut on
the desktop and provide local credentials as stated in the Note below.
NOTE: If the client and server have been installed on the same machine, you can use the
keyword LOCALHOST to connect to the local server. Otherwise, use the IP Address of the
machine where the server is located.
Supported and Unsupported Migrations by HP 3PAR Online Import Utility
for EMC Storage
Verify the types of supported and unsupported migrations by the OIU.
For the supported migration see, Table 2 (page 18)
For the unsupported migration see, Table 3 (page 21)
NOTE:
• All hosts and LUNs in the source groups are migrated. If there are multiple Hosts or LUNs in
the configuration, they will all end up in a single CPG.
• LUNs and hosts can be implicitly added to the migration, even if they are not specified by the
input.
• A createmigration command cannot simultaneously contain a host and a LUN for
migration.
• Only one createmigration is allowed at a time because 3PAR Peer Ports can only be in
one EMC Storage Group at a time.
Table 1 Legend for the following tables
LUN
Host
Supported and Unsupported Migrations by HP 3PAR Online Import Utility for EMC Storage 17