HP 3PAR OS 3.1.3 Command Line Interface Reference
showhost
DESCRIPTION
The showhost command displays information about defined hosts and host paths in the system.
SYNTAX
showhost [options <arg>] [<host_name>...|<pattern>...|<host_set>...]
AUTHORITY
Any role in the system.
OPTIONS
–d
Shows a detailed listing of the host and path information. This option can only be used with -agent
and -domain options.
-verbose
Shows a verbose listing of all host information.
-chap
Shows the CHAP authentication information.
-desc
Shows the host descriptor information.
-agent
Shows information provided by host agent.
-pathsum
Shows summary information about hosts and paths. This option cannot be used with the -d option.
-persona
Shows the host persona settings in effect. This option cannot be used with the -d option.
-listpersona
Lists the defined host personas. This option cannot be used with the -d option. Different host
personas support different host operating systems and have different capabilities. Host personas
may have the following additional capabilities:
• UARepLun. Sends a unit attention when the LUN list changes due to adding or removing
VLUNs.
• ALUA. Enables the Asymmetric Logical Unit Access (ALUA) command and asymmetric state
change unit attention when path counts change due to adding or removing ports in the host's
definition.
• VolSetAddr. Enables HPUX Volume Set Addressing (VSA).
• SoftInq. Enables inquiry data formats for hosts such as Egenera and NetApp.
• NACA. Enables Normal Auto Contingent Allegiance (NACA) bit for AIX.
• SESLun. Enables SCSI Enclosure Services (SES) LUN for host agent support.
-noname
Shows only host paths (WWNs and iSCSI names) that are not assigned to any host. This option
cannot be used with the -d option.
-domain <domainname_or_pattern,...>|<domain_set>
showhost 377