HP 3PAR Solaris Implementation Guide

To display paths connected to a LUN, use the vxdmpadm(1m) utility with the getsubpaths

option:

# vxdmpadm getsubpaths dmpnodename=node_name

Here is an example:

# vxdmpadm getsubpaths dmpnodename=c2t21d36

NAME STATE PATH-TYPE CTLR-NAME ENCLR-TYPE ENCLR-NAME

=============================================================================

c2t21d36s2 ENABLED - c2 3PARdata 3pardata0

c2t23d36s2 ENABLED - c2 3PARdata 3pardata0

c3t20d36s2 DISABLED - c3 3PARdata 3pardata0

c3t22d36s2 DISABLED - c3 3PARdata 3pardata0

To display DMP Nodes, use the vxdmpadm(1m) utility with the getdmpnode option:

# vxdmpadm getdmpnode nodename=c3t2d1

Here is an example:

# vxdmpadm getdmpnode nodename=c2t21d36s2

NAME STATE ENCLR-TYPE PATHS ENBL DSBL ENCLR-NAME

=========================================================================

c2t21d36s2 ENABLED 3PARdata 4 2 2 3pardata0

78 Configuration Examples