HP 3PAR Recovery Manager 1.1.0 Software for Microsoft Hyper-V User Guide (QL226-96343, June 2013)

Success Paths
• Scenario 1: Remove Storage System is successful.
Remove operation is successful.
Failure Paths
• Scenario 1: Session owner is invalid.
Every session command received on RMH Server is validated to originate from the same IP
address that initiated the session. If IP does not match, the command fails.
• Scenario 2: Not previously added.
Storage System specified is not previously added.
Remove-vCopy
Remove-vCopy removes a Virtual Copy.
Preconditions
The user must first login with Login-Rmh.
Post Conditions
• Virtual Copy removed and all available Virtual Volumes deleted, or
• Virtual Copy retained due to at least one Virtual Volume failing to delete with reason other
than not found on storage system.
Syntax
Any optional parameters require square brackets [ ] around them.
Remove-vCopy -RmhServerName <RmhServerName> [-HypervName] -VcNameUuid
<VcNameUuid> -VmNameUuid <VmNameUuid> [-Timestamp] [-Force] [-Verbose]
Table 50 Remove-vCopy parameters
DescriptionOptional/RequiredParameter
Host name of the RMH Server. This is
FQDN or IP address.
Required-RmhServerName
Optionally select Hyper-V host/cluster
to use. If not specified, Hyper-V
Optional-HypervName
host/cluster must be selected using
Select-Hyperv. This is FQDN or IP
address. Synonyms for Hyper-V are
supported. The localhost is not
supported.
Select VC by name/uuid.Required-VcNameUuid
Select name/uuid to filter VC selection
by VM.
Required-VmNameUuid
Specify timestamp of VC to locate in
the format mmddyyhhmmss.
Optional-Timestamp
Bypass confirmation prompt.Optional-Force
Displays progress messages.Optional-Verbose
Remove-vCopy 79