HP 3PAR Service Processor 4.1.0 MU2 Patch P009 Release Notes (QL226-97111)

1 Introduction
The HP 3PAR Service Processor (SP) Software 4.1.0 MU2 P009 Release Notes document includes
information about the release of Service Processor Software Patch 009.
This document should be read prior to the installation of the SP 4.1.0 MU2 P009 Software.
To access this guide, go to http://www.hp.com/3par/support_manuals.
HP 3PAR open source software is available on the HP Portal in the Software Depot Kiosk:
www.software.hp.com/kiosk
• User name: 3PAROPEN_KIOSK
• Password: 3PAROPENSOURCE
NOTE: The InServ Storage Server has been rebranded as HP 3PAR Storage System. There are
instances in this document where menu items and command output refer to the HP 3PAR Storage
System as “InServ” or “InServ Storage Server.”
Related Documentation
The following documents provide information related to HP 3PAR StoreServ Storage systems and
the HP 3PAR Operating System.
Read the…For information about…
HP 3PAR Command Line Interface Administrator’s Manual
and HP Command Line Interface Reference
Using the Command Line Interface (CLI) to configure and
administer HP 3PAR StoreServ Storage systems
HP 3PAR Management Console User’s GuideUsing the HP 3PAR Management Console graphical user
interface to configure and administer HP 3PAR storage
systems
HP 3PAR StoreServ Storage Concepts GuideHP 3PAR storage system concepts and terminology
HP 3PAR Remote Copy Software User’s GuideUsing Remote Copy
HP 3PAR StoreServ 10000 Storage Physical Planning
Manual
Determining HP 3PAR storage system hardware
specifications, installation considerations, power
requirements, networking options, and cabling
HP 3PAR E-Class/F-Class Storage System Physical Planning
Manual
HP 3PAR T-Class Storage System Physical Planning Manual
HP 3PAR Service Processor Software User GuideUsing the service processor to communicate with the HP
3PAR Storage system
4 Introduction