HP 3PAR Service Processor 4.1.0 MU2 Patch P009 Release Notes (QL226-97111)

2 Supported Platforms
The HP 3PAR Configuration Matrix for HP 3PAR OS 3.1.1 and later contains information about
supported hardware and software platforms for HP 3PAR Service Processor 4.1 and subsequent
releases.
NOTE: The physical Service Processor and virtual Service Processor (VSP) are supported on only
English-locale platforms.
The following table describes the Service Processors that are supported with release level 4.1:
Supported modelsPlatform typeService Processor
ESXi 4.1, ESXi 5.0, ESXi 5.1VirtualVirtual Service Processor
DL320e, DL360ePhysicalHP ProLiant
Supermicro IIPhysicalSupermicro
NOTE: For the SP 4.1 release, the SP ID uses one of the following formats:
• 7-character SP ID: The literal “SP” string (2 characters) + 5 digits (for example, SP09997).
This ID format is used for legacy SPs.
• 12-character SP ID: The literal “SP000” string (5 characters) + the HP 3PAR StoreServ 7000
7-digit 3PAR serial number that is located on a label affixed to the node enclosure (DCN1).
The label is on a tab on the back right of the enclosure near Power Cooling Module1 (PCM
1, the PCM on the right). For example, if the HP 3PAR StoreServ 7000 3PAR serial number
is 1601234, the Service Processor ID will be SP0001601234.
NOTE: For systems remaining at HP 3PAR OS 3.1.1.xxx, HP currently supports the use of only
Service Processor software version SP-2.5.x to continue managing the array. Using 3.1.1.xxx with
SP 4.1.0 is not currently supported. Only those systems that are being upgraded to HP 3PAR OS
3.1.2 should upgrade the Service Processor software to SP-4.1.0.
5