HP 3PAR Service Processor Software 4.2.x Release Notes (QR482-96789)

Modifications to the Service Processor
The following issues have been addressed in this release.
DescriptionItemIssue ID
The NTP server IP address will be configured as a server entry.Unable to add NTP server
on VSP with SPmaint and
SPOCC
71269
The issue in which the Storage System Setup Wizard may fail or hang before
you start the “Set storage system network configuration” step has been
Users should be able to
re-run Storage System
Setup Wizard
84161
resolved. You do not need to use the workaround that was described in the
HP 3PAR Service Processor 4.1.x Release Notes.
The issue in which the “Set date and time” step appears to stop responding
on the Setup Progress page of the Service Processor Setup Wizard has been
resolved.
SP Setup Wizard spins on
“Set date and time” in the
Setup Progress page
86785
The issue in which users cannot modify the DNS configuration of the SP by
using SPOCC has been resolved. You do not need to use the workaround
that was described in the HP 3PAR Service Processor 4.1.x Release Notes.
Unable to add DNS via
SPOCC and also not
prompted for domain
name
88187
This fix will increase the maximum file transfer size limit to nearly 2GB.The Service Processor did
not upload crashdmps
90128
and InSplores after high
visibility elevation
This change modifies the Secure Service Collector configuration to use the
SP's loopback IP address instead of the SP's host/public IP address when a
Remote access is possible
if customer sets outbound
only
90261
Remote Operations request is made from HQ for SPOCC connections. When
remote operations is disabled the firewall rules will block connections to
127.0.0.1, port 443, preventing the remote operations connection to be
made.
The issue in which SPMAINT does not correctly identify the user account
when you log in to the SP as the 3parcust user by using the system console
Error with 3parcust user
permissions in CCA menu
92336
has been resolved. You are no longer incorrectly prohibited from using some
commands that the 3parcust account should have permission to use, and
you do not need to use the workaround that was described in the HP 3PAR
Service Processor 4.1.x Release Notes.
This fix allows Maintenance Mode to be supported on arrays with names
longer than 13 characters in length.
Maintenance Mode
setting is not supported
95084,
96333
Handling the case to remove all IP addresses, SP mac addresses and e-mail
addresses by default for any file not explicitly handled.
The Service Processor
scrubber is not removing
98183
all the required data on
the weekly file; IP
addresses remain visible
Known Issues with the Service Processor
Cancel Validation does not cancel the validation process (Issue 95947)
In SPOCC, during the upgrade of the HP 3PAR OS, you navigate to the Check prerequisites page,
click Next, and notice that the pre-checks are being validated. If you then click Cancel Validation,
the user interface indicates that the validation process was canceled; however, in the background,
the validations are still running.
This behavior is by design so that the SPOCC user interface can remain responsive during an
attempt to cancel the validation process.
Modifications to the Service Processor 7