HP 3PAR StoreServ 10000 Storage Physical Planning Manual

Physical Specifications
Table 1 Physical Specifications
Physical Specifications
2M Cabinet
60 x 194.3 x 91.3 cm23.6 x 76.5 x 36 in.Dimensions (width x height x depth)
91.44 cm (front) and 76.2 cm (rear)36 in. (front) and 30 in. (rear)Service Clearance
195.5 kg439.8 lbs.Weight (not populated)
852.8 kg1,880 lbs.Maximum Weight (fully populated)
213.2 kg470 lbs.Maximum Weight per leveling foot
10.5 kg/sq. cm149.6 lbs./sq. in.Maximum Load per leveling Foot
Component Weights
296.7 kg654.1 lbs.10400 Base Configuration
338.9 kg747.1 lbs.10800 Base Configuration
60.4 kg133 lbs.2 Controller Nodes (fully populated)
81.6 kg180 lbs.Drive Chassis (fully populated)
6.0 kg13.3 lbs.Service Processor
11.9–16.8 kg26.2–37 lbs
Capacity Specifications
Table 2 Storage Capacity Specifications
1080010400Feature
2, 4, 6, or 82 or 4Number of controller nodes
256 GB128 or 256 GBController node boot drive
64 GB with 2 nodes, 128 GB with 4
nodes, 192 GB with 6 nodes, 256 GB
with 8 nodes
Minimum configuration: 32 GB with
2 nodes, 64 GB with 4 nodes
Large configuration: 64 GB with 2
nodes, 128 GB with 4 nodes
Control Cache
128 GB with 2 nodes, 256 GB with 4
nodes, 384 GB with 6 nodes, 512 GB
with 8 nodes
Minimum configuration: 64 GB with
2 nodes, 128 GB with 4 nodes
Large configuration: 128 GB with 2
nodes, 256 GB with 4 nodes
Data Cache
0-48, 0-96, 0-144, 0-1920-48, 0-96Host Ports
4-48, 4-96, 4-1924-48, 4-96Host Ports GZ number
8-24 with 2 nodes, 16-48 with 4
nodes, 32-96 with 8 nodes
8-24 with 2 nodes, 16-48 with 4
nodes
FC Disk Ports
0-8 with 2 nodes, 0-16 with 4 nodes,
0-32 with 8 nodes
0-8 with 2 nodes, 0-16 with 4 nodes10 GB/s iSCSI Host Ports
0-48 with 2 nodes, 0-96 with 4 nodes,
0-144 with 6 nodes, 0-192 with 8
nodes
0-48 (2 node), 0-96 (4 node)Fibre Channel host ports (four-port
adapters)
1
0-32 10 Gb/s0-16 10 Gb/siSCSI host ports
16-1,92016-960Number of drives
1
10400/10800 Storage System Specifications 11