HP 3PAR StoreServ 10000 Storage Physical Planning Manual

Figure 25 Routing of the Main Power Cords, Single Phase and 3–Phase PDU Systems
DescriptionItem
Upper access opening1
Lower access opening2
Cabinets with HP single-phase PDUs have 12 ft (3.66 m) main power cords. Cabinets with HP
three-phase PDUs have 11 ft (3.35 m) main power cords. These are used with Product Numbers
QW978A, QW979A, and QW982A. Cabinets with 3PAR PDUs have 14 ft (4.27 m) main power
cords. These are used with Product Numbers QR584C, QR585C, QR632C, QR637C, QR596A,
and QR639A. Some cord length will be consumed inside the cabinet depending on the location
of the PDU and whether the customer's power is at the top or bottom.
Electrical Requirements and Limitations
Before physically installing a storage system, verify that the operating site has the necessary electrical
circuitry. Use the approximate current requirements for storage server components listed to estimate
Electrical Requirements and Limitations 39