HP 3PAR StoreServ 10000 Storage Physical Planning Manual

Figure 48 Required Dimensions for the DC4 Drive Chassis
If you are installing the HP 3PAR equipment in a Four Post Cabinet, it must meet the minimum and
maximum specifications shown in Figure 49 (page 74).
Figure 49 Required Width and Depth Dimensions for a Four-Post Cabinet
NOTE: When installing HP 3PAR equipment in a Four Post Cabinet, there must not be any
obstructions to the installation of the rails and the chassis, and there must be a clear path between
the front and rear vertical (RETMA) rails.
74 Third-Party Rack Mounting