HP 3PAR Management Console 4.3.0 Release Notes (QL226-96340, December 2012)

1.3 Modifications to the Management Console
The following items have been addressed in this release.
DescriptionItemBug ID
The Management Console reportedly removed VLUNs other than those
the user selected for deletion. However, this issue has not been
The Management Console reportedly
removed the wrong VLUNs
62078
reproduced. To track and verify possible future issues, the log now
records all VLUNs to be removed.
The Create Virtual Volume wizard now sets zero detect to “on” by
default, regardless of the HP 3PAR OS version of the HP 3PAR
StoreServ Storage system.
The Create Virtual Volume wizard
did not set zero detect to “on” by
default
79274
To override the default, turn on Advanced Mode in the Virtual Volume
wizard and change the zero detect setting.
NOTE: If you use the CLI to create virtual volumes on storage systems
using a HP 3PAR OS previous to 3.1.2, the CLI command will set
zero detect to “off” by default.
The Tune System feature no longer requires a Dynamic Optimation
license for HP 3PAR OS 3.1.2 and later systems.
The Tune System feature required a
Dynamic Optimation license
74623
An issue in the CPG growth area, which caused the Management
Console to incorrectly display the CPG as failed, has been fixed.
The Management Console showed
the CPG as failed although the CPG
can grow
46335
The Management Console now displays the correct RAID type for
volumes. If a RAID 6 volume is created, the Management Console
now displays RAID 6 instead of the incorrect RAID 0.
The Management Console did not
show the correct RAID type
67016
1.4 Known Issues with the HP 3PAR Management Console
1.4.1 Peer Motion Migration of a Physical Copy Still in Progress Will Fail (Bug 79124)
If creation of a physical copy is in progress when you attempt a Peer Motion migration, the Peer Motion
migration will fail.
Workaround:
Wait until the physical copy task has completed and try the migration again.
1.4.2 Cage Upgrades Can Cause an Exception (Bug 79294)
When you upgrade a cage, the Management Console might throw an exception.
Workaround:
Close the Management Console while you are upgrading a cage.
1.4.3 Converting Existing Remote Copy 1-to-1 Configurations to Synchronous Long
Distance (SLD) Not Supported (Bug 48421)
The Management Console currently does not support conversion of an existing Remote Copy 1-to-1
configuration to a Synchronous Long Distance configuration. Providing this conversion will be addressed
in a future release.
Workaround:
Use HP 3PAR OS CLI commands to convert a 1-to-1 configuration to a Synchronous Long Distance
configuration.
4 1.3 Modifications to the Management Console