HP 3PAR Management Console 4.3.0 Release Notes (QL226-96340, December 2012)

1.4.4 Cannot Create RW Snapshots from RW Bases or Snapshots (Bug 79230)
If the virtual volumes used to create a snapshot are read/write (RW), the Management Console can
only create read-only (RO) snapshots. The Management Console does not support creating RW
snapshots from RW bases (or snapshots).
Workaround:
Use HP 3PAR OS CLI commands to create RW snapshots from RW bases or snapshots.
1.4.5 The Management Console Fails during a Rolling Upgade (Bug 46452)
A Management Console fatal error occurs when a rolling upgrade is performed on the HP 3PAR
StoreServ Storage system.
Workaround:
When performing a rolling upgrade on an HP 3PAR StoreServ Storage system, shut down all instances
of the Management Console that are connected to that HP 3PAR StoreServ Storage system.
1.4.6 Use IE 8 or 9 or Firefox 14 or 15 to Access Management Console Online Help
(Bug 79134)
HP 3PAR Management Console Online Help is not supported in Internet Explorer 10.
Workaround:
If you are unable to use Internet Explorer 8 or 9, use Mozilla Firefox 14 or 15 to access the Online
Help.
1.4.7 The Management Console Might Run out of Memory when Left Running (Bug
44409)
The Management Console might eventually run out of memory and require a restart if it is connected
to multiple HP 3PAR StoreServ Storage systems and left running for days. This issue occurs when the
JVM does not release memory back to the operating system even after garbage collection has occurred
and even when the Management Console is not using all the memory allocated by the JVM.
Workaround:
None.
1.4.8 Stop Locate Does Not Stop the Blinking LED (Bug 78560)
The Stop Locate option for a system in the Management Console does not stop the HP 3PAR StoreServ
Storage system's LED from blinking.
Workaround:
Use the Locate System option in the Management Console with a duration of 1 second.
1.4.9 Minimally Disruptive Migration with Hosts with Maximum Length Names Does
Not Re-export (Bug 81002)
If you use minimally disruptive migration with a host that has a name at the maximum supported length
(31 characters), Peer Motion will fail to export the volumes at the destination.
Workarounds:
• Shorten the host name until after the migration.
• Manually export the migrated volumes at the destination after import.
1.4 Known Issues with the HP 3PAR Management Console 5