HP 3PAR StoreServ 7000 SmartStart 1.2 User's Guide (QL226-96854, June 2013)
Table Of Contents
- HP 3PAR StoreServ 7000 Storage SmartStart 1.2 Software User's Guide
- Part I Using SmartStart to Configure Storage
- Welcome
- 1 Prepare to Configure
- 2 Setting Up the Service Processor
- 3 Setting Up the HP 3PAR StoreServ Storage System
- 4 Connect to the HP 3PAR StoreServ 7000 Storage System
- 5 Configure the Hosts
- 6 Configure Storage
- 7 Install the HP 3PAR Management Console
- Part II Understanding Storage
- Part III Additional Resources
- Glossary
16 Additional Resources
Related Documentation
To access documentation that will help you manage your HP 3PAR StoreServ Storage system, go
to the HP 3PAR StoreServ Storage site, and then click the Support link for your product:
http://www.hp.com/go/3par
The HP 3PAR Documentation site contains information about:
• Hardware and software installation
• Setup implementation by OS
• Upgrade and maintenance
• Storage concepts
• Administration and management
• Troubleshooting
Troubleshooting SmartStart
To troubleshoot SmartStart:
• See the HP 3PAR StoreServ 7000 Storage Troubleshooting Guide. To access this guide, go
to the HP 3PAR StoreServ Storage site, and then click the Support link for your product:
http://www.hp.com/go/3par
• Go to the HP 3PAR StoreServ Storage Systems Guided Troubleshooting site:
http://www.hp.com/support/hpgt/3par
To troubleshoot setting up the Service Processor or the HP 3PAR StoreServ Storage system, see:
55