HP 3PAR StoreServ 7000 Storage Service Guide

Ethernet LEDs
The controller node has two built-in Ethernet ports and each includes two LEDs (see Table 7 (page
36)).
Table 7 Ethernet LEDs
1 Gbe LinkOnGreenLink Up
Speed
Left
100 Mbit LinkOnAmber
No link established or 10 Mbit LinkOff
No link activityOnGreenActivityRight
No link establishedOff
Link activityFlashing
Node FC and CNA Port LEDs
The controller node has two FC ports; each includes two LEDs. The arrow head-shaped LEDs point
to the port they are associated with.
NOTE: Incorrectly configured interconnect cables illuminate amber port LEDs.
Table 8 FC Port LEDs
Wake up failure (dead device) or power is not
applied
OffNo lightAll ports
Not connectedOffAmberFC-1
Connected at 4GB/sec.3 fast blinks
Connected at 8GB/sec.4 fast blinks
Normal/Connected – link upOnGreenFC-2
Link down or nor connectedFlashing
Fibre Channel Adapter LEDs
Table 9 FC Adapter LEDs
Wake up failure (dead device) or power is
not applied
OffNo lightAll ports
Not connectedOff
AmberPort speed Connected at 4GB/sec.3 fast blinks
Connected at 4GB/sec.4 fast blinks
Normal/Connected – link upOn
GreenLink status
Link down or not connectedFlashing
Converged Network Adapter LEDs
Table 10 CNA LEDs
Link downOff
GreenLinkUpper
Link upOn
No activityOff
GreenACT (Activity)Lower
ActivityOn
36 Understanding LED Indicator Status