HP 3PAR StoreServ 7000 Storage Troubleshooting Guide

5 Troubleshooting
The HP 3PAR OS CLI checkhealth command checks and displays the status of storage system
hardware and software components. For example, the checkhealth command can check for
unresolved system alerts, display issues with hardware components, or display information about
virtual volumes that are not optimal.
By default the checkhealth command checks most storage system components, but you can also
check the status of specific components. For a complete list of storage system components analyzed
by the checkhealth command, see “checkhealth Command” (page 27).
checkhealth Command
The checkhealth command checks and displays the status of system hardware and software
components.
Command syntax is: checkhealth [<options> | <component>...]
Command authority is Super, Service
Command options are listed:
• -list, lists all components that checkhealth can analyze
• -quiet, suppresses the display of the item currently being checked
• -detail, displays detailed information regarding the status of the system
The <component> is the command specifier, which indicates the component to check. Use the
-list option to view the list of components.
Using the checkhealth Command
Use the checkhealth command without any specifiers to check the health of all the components
that can be analyzed by the checkhealth command.
The following example lists both summary and detailed information about the hardware and
software components:
cli% checkhealth -detail
Checking alert
Checking cage
Checking dar
Checking date
Checking ld
Checking license
Checking network
Checking node
Checking pd
Checking port
Checking rc
Checking snmp
Checking task
Checking vlun
Checking vv
Component -----------Description----------- Qty
Alert New alerts 4
Date Date is not the same on all nodes 1
LD LDs not mapped to a volume 2
License Golden License. 1
vlun Hosts not connected to a port 5
checkhealth Command 27