HP 3PAR StoreServ 7000 Storage Troubleshooting Guide

SNMP
Displays issues with SNMP. Attempts the showsnmpmgr command and reports errors if the CLI
returns an error.
Format of Possible SNMP Exception Messages
SNMP -- <err>
SNMP Example
Component -Identifier- ----------Description---------------
SNMP -- Could not obtain snmp agent handle. Could be
misconfigured.
SNMP Suggested Action
Any error message that can be produced by showsnmpmgr can display.
Task
Displays failed tasks. Checks for any tasks that have failed within the past 24 hours. This is the
default time frame for the showtask -failed command.
Format of Possible Task Exception Messages
Task Task:<Taskid> "Failed Task"
Task Example
Component --Identifier--- -------Description--------
Task Task:6313 Failed Task
In this example, checkhealth also showed an alert. The task failed because the command is
entered with a syntax error:
Alert sw_task:6313 Task 6313 (type 'background_command', name 'upgradecage -a
-f') has failed (Task Failed). Please see task status for details.
Task Suggested Action
The CLI command showtask -d Task_id displays detailed information about the task. To clean
up the alerts and the reporting of checkhealth, you can delete the failed-task alerts. The alerts
are not auto-resolved and remain until they are manually removed with the MC (GUI) or CLI with
removealert or setalert ack. To display system-initiated tasks, use showtask -all.
cli% showtask -d 6313
Id Type Name Status Phase Step
6313 background_command upgradecage -a -f failed --- ---
Troubleshooting Storage System Components 51