HP 3PAR Management Console 4.3.0 Software User's Guide (QL226-96337, December 2012)

DescriptionFieldGroup
NOTE: The Device RPM number does not represent a rotational speed for the drives
without spinning media (SSD). It is meant as a rough estimation of the performance
difference between the drive and the other drives in the system. For FC and NL drives,
the number corresponds to both a performance measure and actual rotational speed.
For an SSD drive, the number is to be treated as relative performance benchmark that
takes into account in I/O per second, bandwidth, and the access time.
The CPG's RAID type.RAID Type
The requested and current level of failure tolerance for
a volume created from this CPG: <System Default>,
Cage, Port, or Magazine.
Availability
The set size.Set Size
The number of contiguous bytes in KB.Step Size
The location on physical disks where chunklets are used:
near the beginning (Fast) or near the end of the disk
(Slow).
Preferred Chunklets
The filtering used for the disks making up the CPG.Disk Filter
Virtual Volumes Tab
The Virtual Volumes tab displays the virtual volumes that make up the selected CPG.
The following information is displayed:
DescriptionColumn
The name of the virtual volume.Name
The domain in which the volume resides.Domain
The current state of the volume. See “System and Component Status Icons” (page 407).State
The type of virtual volume.Type
Indicates if the selected volume is fully provisioned or a thinly provisioned virtual volume.Provisioning
The name of the Common Provisioning Group (CPG) from which user space is provisioned.User CPG
The name of the CPG from which copy space is allocated.Copy CPG
The RAID type of the disk.RAID
The size (in GiB) reserved for user space.Reserved User Size
The size (in GiB) reserved for copy space.Reserved Copy Size
The host to which the virtual volume has been exported.Exported To
The disk type, Fibre Channel (FC), Nearline (NL), or Solid State (SSD).Device Type
126 Managing Common Provisioning Groups