HP 3PAR Management Console 4.3.0 Software User's Guide (QL226-96337, December 2012)

DescriptionFieldGroup
Select the device type, Fast Class (FC), Near Line (NL), or Solid
State Device (SSD). The capacity and capacity usage of the
selected device type is displayed in graphical form.
Device TypeCapacity
Select to display logical capacity.Logical
Select to display raw capacity.Raw
Displays the allocation of the volume's admin, copy, and user space.Virtual Volume Allocation
Displays the amount of space saved through thinly provisioned virtual volumes.Thinly Provisioned Savings
(Base Volumes)
The volume's creation date.Creation DateHistory
The volume's retention time, if any.Retention Time
The volume's expiration date, if any.Expiration Time
The date on which the volume's copy space was calculated.Copy Space Calculation
Date
Any comments about the volume.Comments
The volume's Remote Copy status.RC StatusRemote Copy (displayed
only for RC volumes)
The Remote Copy group to which the volume belongs.RC Group
The sync state of the remote copy (e.g., Synced, Stopped).Sync State
Indicates if the LUN is writable from the host.Writable LUNs
Settings Tab
The following information is displayed in the detail pane's Settings tab:
DescriptionFieldGroup
Indicates if the selected volume is fully
provisioned or a thinly provisioned
virtual volume.
ProvisioningUser Space Provisioning
The name of the Common Provisioning
Group (CPG) from which user space is
provisioned.
CPG
If enabled, the allocation warning
percentage.
Allocation Warning
If enabled, the allocation limit.Allocation Limit
160 Viewing Virtual Volumes