HP 3PAR Management Console 4.3.0 Software User's Guide (QL226-96337, December 2012)

DescriptionColumn
The serial number of the drive.Serial Number
LED indicating when the node battery can be replaced.Service LED
The type of drive (e.g., ATA, SATA)l.Type
The firmware version used by the drive.Firmware Version
The size of the drive, in GiB.Size
Viewing Controller Node Alerts Details
To view the Controller Node Alerts details screen:
1. Access the Controller Nodes screen.
2. In the list pane, click the Summary tab.
3. Select a node.
4. In the detail pane, click the Alerts tab.
The Alerts tab provides the following information for a specific node as selected in the list pane:
DescriptionColumn
The severity of the alert. See “Alert Severity Indicators” (page 406).Severity
The alert ID.ID
The alert state.State
The last occurrence of the alert.Last Time
A brief description of the alert.Message
The number of times the alert has been issued.Repeat Count
The first occurrence of the alert.First Time
Editing Controller Node Power Supplies
The HP 3PAR Management Console allows you to edit the serial number of a controller node power
supply.
NOTE: V-Class controller node power supply serial numbers cannot be edited.
1. In the Manager Pane, click Systems.
2. In the Management Tree, click Controller Nodes under the system whose power supply you
wish to edit.
3. In the lower Controller Node Details pane displayed in Management Window, select the
Power Supplies tab.
4. Right-click the power supply whose serial number you wish to edit and click Edit.
Editing Controller Node Power Supplies 297