HP 3PAR Management Console 4.3.0 Software User's Guide (QL226-96337, December 2012)

The following information is displayed:
DescriptionColumn
Position of the drive magazine within the drive cage.Position
The current stage of the drive cage.State (for DCS1 and DCS2 drive cages)
The current state of the drive magazine. See “System and Component
Status Icons” (page 407).
Status LED (for DC2 and DC4 drive cages)
The current state of the hot plug LED.Hot Plug LED
(for DC2 and DC4 drive cages)
Number of disks in the drive magazine.Disks
Status of the Interface Card loop (A) to the node.Loop A State
Status of the Interface Card loop (B) to the node.Loop B State
Viewing Drive Cage Physical Disks Details
To view physical disk details:
1. Access the Drive Cages screen.
2. In the list pane of the Drive Cages screen, click the Summary tab and then click a drive cage.
3. In the detail pane, click the Physical Disks tab.
The Physical Disks tab appears as follows (the following image depicts information for a DC2 drive
cage. Your screen may differ depending on the drive cage type in your system):
310 Managing Drive Cages