HP 3PAR Management Console 4.3.0 Software User's Guide (QL226-96337, December 2012)

Viewing Host Information
To view more in-depth information about hosts for a single system, perform the following:
1. In the Manager pane, click Hosts.
2. In the Management tree, click Hosts under the system that contains the hosts you wish to view.
The Hosts screen is divided into a list and a detail pane. The list pane provides general information
about all hosts in a system. The detail pane provides detailed information about a specific host
selected in the list pane.
“List Pane” (page 90)
“Detail Pane” (page 92)
List Pane
Information in the list pane is provided on two tabs: Hosts and Host Explorer.
“Hosts Tab” (page 90)
“Host Explorer Tab” (page 91)
Hosts Tab
The Hosts tab can be set to show summary information or descriptor information.
The following summary information is provided:
DescriptionColumn
The host name.Name
The domain in which the host resides.Domain
The host port.Host Ports
The system port(s) on which the host is visible.Storage System Ports
The node(s) connected to the host.Node ID(s)
One of the following host personas:Persona
• 1 = Generic (Unit Attention Report LUNs, Enable SES device)
• 2 = Generic-ALUA (Unit Attention Report LUNs, Report Target Port Groups, Enable
SES device)
• 6 = Generic-legacy
• 7 = HPUX-legacy (Volume Set Addressing)
• 8 = AIX-legacy (Normal Auto Contingent Allegiance)
• 9 = Egenera (Soft Inquiry Data)
The number of volumes exported from the host.Volumes Exported
The total size in GiB of exported data.Total Exported Size
90 Managing Hosts