HP 3PAR SmartStart 1.1.1 User's Guide (QR482-96124, May 2013)

Figure 1 StoreServ Serial Number
Configuring Networking
Enter the name and IP address information for your new HP 3PAR StoreServ Storage system.
For more information, see your completed Storage System Software Installation Checklist from the
HP 3PAR StoreServ 7000 Site Planning Manual.
Configuring Your Time Zone
You can:
• Copy the time zone settings from the Service Processor to the HP 3PAR StoreServ Storage
system
• Enter a specific date and time
• Use the date and time settings on your NTP server, if applicable
• Select your continental region (Africa, America, Antarctica, Arctic, Asia, Atlantic, Australia,
Europe, Indian, Pacific) and the city or country closest to you from the drop-down lists that are
based on the tz database
Changing the HP 3PAR StoreServ Storage System Password
Enter a new, secure password for the user 3paradm.
You will use this username and password to access your new HP 3PAR StoreServ Storage system.
NOTE: Passwords for 3paradm username may include all printable characters between 6-8
characters in length.
Monitoring Setup Progress
The Setup system volumes operation in the Progress step can continue for up to 40 minutes before
the wizard displays a progress indicator. Do not attempt to cancel out of the wizard during the
Progress step.
Configuring Networking 15