HP 3PAR Command Line Interface Administrator's Manual: HP 3PAR OS 3.1.2 (QR482-96525, September 2013)

ManualsBrandsHP ManualsStorageHP 3PAR StoreServ 7450 2-node Base

In the showport command output shown below, primary port 0:0:1 corresponds to partner

persistent port 1:0:1 with a failover of state of none.

root@snodeb40:S170# showport

N:S:P Mode State ----Node_WWN---- -Port_WWN/HW_Addr- Type Protocol Label

Partner FailoverState

0:0:1 target ready 2FF70002AC0000AA 20010002AC0000AA host FC -

1:0:1 none

0:0:2 initiator ready 2FF70002AC0000AA 20020002AC0000AA disk FC -

- -

0:0:3 target loss_sync 2FF70002AC0000AA 20030002AC0000AA free FC -

1:0:3 none

0:0:4 target ready 2FF70002AC0000AA 20040002AC0000AA host FC -

- -

0:3:1 target loss_sync 2FF70002AC0000AA 20310002AC0000AA free FC -

1:3:1 none

0:3:2 initiator ready 2FF70002AC0000AA 20320002AC0000AA disk FC -

- -

0:5:1 initiator ready 2FF70002AC0000AA 20510002AC0000AA disk FC -

- -

0:5:2 target ready 2FF70002AC0000AA 20520002AC0000AA host FC -

1:5:2 none

0:6:1 peer offline - 0002AC53069C rcip IP RCIP0

- -

1:0:1 target ready 2FF70002AC0000AA 21010002AC0000AA host FC -

0:0:1 none

1:0:2 initiator ready 2FF70002AC0000AA 21020002AC0000AA disk FC -

- -

1:0:3 target loss_sync 2FF70002AC0000AA 21030002AC0000AA free FC -

0:0:3 none

1:0:4 initiator ready 2FF70002AC0000AA 21040002AC0000AA host FC -

- -

1:3:1 target loss_sync 2FF70002AC0000AA 21310002AC0000AA free FC -

0:3:1 none

1:3:2 initiator loss_sync 2FF70002AC0000AA 21320002AC0000AA free FC -

- -

1:5:1 initiator ready 2FF70002AC0000AA 21510002AC0000AA disk FC -

- -

1:5:2 target ready 2FF70002AC0000AA 21520002AC0000AA host FC -

0:5:2 none

1:6:1 peer offline - 0002AC520041 rcip IP RCIP1

- -

In the following example, port 0:0:1 is in the process of failing over to port 1:0:1.

root@snodeb40:S170# showport 0:0:1 1:0:1

N:S:P Mode State ----Node_WWN---- -Port_WWN/HW_Addr- Type Protocol Label Partner

FailoverState

0:0:1 target offline 2FF70002AC0000AA 20010002AC0000AA free FC - 1:0:1

failover_pending

1:0:1 target ready 2FF70002AC0000AA 21010002AC0000AA host FC - 0:0:1

none

In this example, the failover from port 0:0:1 to port 1:0:1 has completed.

root@snodeb40:S170# showport 0:0:1 1:0:1

N:S:P Mode State ----Node_WWN---- -Port_WWN/HW_Addr- Type Protocol Label Partner

FailoverState

0:0:1 target offline 2FF70002AC0000AA 20010002AC0000AA free FC - 1:0:1

failed_over

76 Managing Ports and Hosts