3PAR InForm® OS 2.2.4 Quick Start Guide

3PAR
InForm
®
OS
2.2.4 Quick
Start Guide
Please send documentation comments to:
[e-mail]
Creating a thinly Provisioned
virtual volume
1. From the Menu bar, select
Actions > Provisioning > VV > Create.
2. Use the Create Virtual Volume wizard to create
a thinly provisioned virtual volume.
3. Select TPVV from the Provisioning list.
exPorting a virtual volume
1. From the Menu bar, select
Actions > Provisioning > VLUN > Create.
2. Use the Export Virtual Volume dialog box to
create a VLUN template.
Creating a virtual CoPy
1. From the Menu bar, select
Actions > Provisioning > VV > Create
Virtual Copy.
2. Use the Create Virtual Copy dialog box to create
a virtual copy.
Creating a PhysiCal CoPy
1. From the Menu bar, select
Actions > Provisioning > VV > Create
Physical Copy.
2. Use the Create Physical Copy dialog box to
create a physical copy.
Getting Started
with the InForm
Management Console
For complete information about the procedures in
this section, refer to the 3PAR InForm Management
Console Online Help.
Creating a host
1. From the Menu bar, select
Actions > Hosts > Create.
2. Use the Create Host wizard to create a host.
Creating a Common
Provisioning grouP
1. From the Menu bar, select
Actions > Provisioning > CPG > Create.
2. Use the Create CPG wizard to create a CPG.
Creating a virtual volume
1. From the Menu bar, select
Actions > Provisioning > VV > Create.
2. Use the Create Virtual Volume wizard to create
a base volume.
3. Select either Base Volume (Direct from PDs)
or Base Volume (Fully Provisioned from CPG)
from the Provisioning list.
Part No. 320-200075 Rev A
May 2008
3PAR Inc.
4209 Technology Drive
Fremont, CA 94538 USA