Brocade Access Gateway Administrator's Guide - Supporting Fabric OS v5.3.0 (53-1000633-01, June 2007)

Access Gateway Administrator’s Guide 15
53-1000633-01
Notes on joining the switch to a fabric
3
To use a previous configuration
1. Enter the switchDisable command to disable the switch.
2. Enter the configDownload command to revert to the previous configuration.
3. Enter the switchEnable command to bring the switch back online.
The switch automatically joins the fabric.
To allow the switch to merge with the fabric
NOTE
Only connect the switch to the fabrics which you want it to join.
1. Enter the switchDisable command to disable the switch.
2. Enter the defZone
--allAccess command to allow the switch to merge with the fabric.
3. Enter the cfgSave command to commit the defzone changes.
4. Enter the switchEnable command to enable the switch and allow it to merge with the fabric.
The switch automatically joins the fabric.