Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

438 Fabric OS Command Reference
53-1000599-02
portCfg
2
-f |--dbgFlags value
Defines optional debug flags. The default is 0xF7C80000. This
parameter is primarily for use by technical support personnel.
ftrace FTRACE is a debug tool primarily for Tech Support personnel. It is
implemented as a subcomponent of the VEnEmulation feature. It includes
the ability to freeze ntraces on certain events and to retain the trace
information for future examination. All FC frames that are routed through the
VE port provided by an FCIP tunnel can be traced. The syntax for the portCfg
ftrace command is as follows:
portCfg ftrace [slot/]Ge_Port tunnel_Id cfg | del [FeatureArgs]
This command has the following operands:
tunnel_Id
Specifies the tunnel ID for the FTRACE configuration. The range is 0-7.
cfg Creates or modifies the FTRACE configuration.
del Deletes an existing FTRACE configuration.
The following optional feature arguments are supported with the cfg and del options. These
configurations are persistent.
-a 1|0 Enables or disables ACO. 1 is enabled, O is disabled. The default value is
0.
-b Specifies the number of buffers. The range is 0-8. The default value is 0.
-e 1|0 Enables or disables FTRACE. 1 is enabled, O is disabled. The default
value is 0.
-i value Displays the mask value. The range is 00000000 toFFFFFFFF. The
default is FFFFFFFF.
-p value Specifies the post trigger percentage value. The range is 0 to 100. The
default is 5.
-r value Specifies the number of records. The range is 0 to 1,677,721. The
default is 200000.
-s value Specifies the trigger mask value. The range is 00000000 to FFFFFFFF.
The default is 00000003.
-t value Specifies the trace mask value. The range is 00000000 to FFFFFFFF. The
default is 80000C7B.
-z value Specifies the trace record size in bytes. The range is 80 to 240 bytes. The
default is 80 bytes.