HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

108 Change management
Figure 55 Select fabrics
6. In the SAN Elements tab, select the fabrics that you want in the change management profile. Click the
right arrow to add them.
7. Click Next.
All switches in selected fabrics must be logged in. A switch login dialog box opens if the login
information is not already set. Enter the switch login information if necessary.
8. After establishing a login to each switch in the selected fabric (if necessary), the Configure Automated
Checks window opens (see Figure 56).
Figure 56 Configure automated checks
If you do not want to set up an automated schedule to perform the checks, click Configure schedule
later, click Next, and skip to step 15.
9. To schedule automated checks, click Take Snapshots per this schedule.
10.Click an element in the Start Time field (month, day, year, hour, minute, second, AM or PM) and use the
scroll buttons to change the elements to the exact time you want Fabric Manager to begin checking the
selected fabrics for any changes to your selected parameters.