HP StorageWorks Fabric Manager 5.x Administrator Guide (AA-RUQSF-TE, September 2005)

96 Using the Performance Monitor
5. Define the time range or interval using one of the following:
•Click Last, enter a number, and then select the time increment (minutes, hours, or days).
•Click From Time and then enter values in the From Time and To Time fields. This includes the month
(mm), day (dd), year (yyyy), hour (HH), minute (MM), and morning (AM) or afternoon (PM).
6. Select the Granularity (the time interval between samples).
The available options are 5 minutes, 30 minutes, 2 hours, and 1 day. See ”Granularity” on page 88
for information on how granularity is calculated.
7. For Port Statistics reports only: Select which ports you want displayed in your graph:
•Click All: Includes all ports in the database with the specified granularity and time range.
•Click Device Ports Only: Incudes only device ports (F_Ports and L_Ports) in the database with the
specified granularity and time range.
•Click ISL Ports Only: Includes only ISL ports (EX_Ports and E_Ports) in the database with the specified
granularity and time range.
•Click Advanced Port Selection and then click Select Ports if you want to select specific ports.
The Advance Port Selection dialog box opens (see Figure 46 on page 94).
All of the switches (that were available when the Generate Report dialog box was launched) are
listed. If another user has discovered or removed a fabric, switch, or port since then, it is not
reflected in this list.
NOTE: If the port type of a switch in a fabric changes, and Performance Monitor is enabled, multiple
port WWNs with different port types are displayed in the Performance Monitor table and graph reports.
8. Click OK.
Your custom Performance Monitor graph is displayed (see Figure 48).
If there is no information matching the report criteria you selected, an informational message reports
No Performance statistics records were found matching the specified search
criteria. Click OK in the information message to close it.