HP StorageWorks SAN Switch Rack Mount Kit Installation Instructions (A7511-90902, May 2007)

11SAN Switch rack mount kit installation instructions
b. Depending on the rack you are using, complete one of the following
tasks:
— For HP 10000 Series racks, install two #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers and two #10
adapter washers in the upper and lower hole locations of the right
rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with
captive star lock washers and two #10 adapter washers in the upper
and lower hole locations of the left rail, as shown in Figure 4.
Figure 4: Assembling the Outer Rails (HP 10000 Series Racks)