HP StorageWorks SAN Switch Rack Mount Kit Installation Instructions (A7511-90902, May 2007)

13SAN Switch rack mount kit installation instructions
5. Depending on the device model, the SAN Switch Rack Mount Kit
requires different screw types for securing the inner rails. Use Table 2 to
determine the number and screw type for your specific switch or MP
Router model.
Caution: Do not use any other screws other than the ones provided in the
kit. Use of longer screws may cause damage to internal components.
6. Identify the screw holes on the inner rails designed for your specific
device as follows:
a. To attach the inner rails to the SAN Switch 2/16, SAN Switch 2/8V,
or SAN Switch 2/16V use the screw holes marked 8.
b. To attach the inner rails to the 4/8 and 4/16 SAN Switches, use the
screw holes marked 8.
Table 2: Number of Screws Required to Secure the Inner Rails
Device Model
#8-32 x .312 Phillips
Pan-head SEMs Screws
#8-32 x 3/16-inch
Screws
SAN Switch 2/16,
SAN Switch 2/8V, or
SAN Switch 2/16V Ten (Five per rail) N/A
SAN Switch 2/32 N/A 12 (Six per rail)
MP Router Six (Three per rail) N/A
SAN Switch 4/32 Ten (Five per rail) N/A
4/8 and 4/16 SAN
Switch
Ten (Five per rail) N/A
4/64 SAN Switch
and
400 MP Router switch
Ten (Five per rail)
N/A
4/32B SAN Switch Six (Three per rail) N/A