Manualshelf

Module Installation Guide 2005-12

ManualsBrandsHP ManualsComputer AccessoriesHP 4-port 10GbE CX4 zl Module for Factory Integration
11121314151617181920
7
Installing the Module
Installing or Removing the Optical Media Converter
You can connect an Optical Media Converter (OMC) to the fixed ports only.
Use only ProCurve OMCs.
Installing the OMC:
1. Connect the OMC to the fixed port.
2. Push it until it clicks.
Figure 3. Installing an OMC
The OMC has a single bi-color LED to indicate power and link. The LED is
orange when the OMC has power but no link. The LED turns green when a
link is established.
Removing the OMC:
1. Disconnect the network cable from the OMC before removing it from the
module.
2. Grasp the extractor handle and pull straight out.
Extractor handle