Manualshelf

Module Installation Guide 2005-12

ManualsBrandsHP ManualsComputer AccessoriesHP 4-port 10GbE CX4 zl Module for Factory Integration
11121314151617181920
10
Installing the Module
Connecting Cables
Figure 7. Connecting the Fiber Cable
Figure 8. Connecting the Copper Cable
1. Remove the dust covers
from the cable connectors on
the transceiver port.
2. Aligning the notches on
the cable connectors with
the slots of the transceiver
ports, press the cable
connector into the
transceiver port until it snaps
into place.
2
1
Note
To ensure proper transmit/receive connections, make sure the transmit from
one device is connected to the receive of the other device.
1. Push the copper cable
connector into the copper
transceiver port.
2. Push the handle in to
engage the locking clips.
Handle