Read Me First for 10GbE 2-port X2 / 2-port CX4 yl Module (J8694A) 2008-06

Read Me First
for the ProCurve Switch yl Module (J8694A)
1
The latest edition is always available in PDF format and downloadable as described in “View or Download the Software Manual Set” on page 1.
X2 Transceiver Operating Temperature Variance
The X2 transceivers are rated at a lower operating temperature {(0° C to 40° C (32° F to 104° F)} than the
6200yl and 3500yl switches or the yl module {
0° C to 55° C (32° F to 131° F)}. Therefore when an X2
transceiver is installed in a yl module in a 6200yl or 3500yl Switch, it lowers the temperature rating
of the module and the switch to equal the rating of the transceiver.
Note
Hot swapping the yl module is not supported. See the ProCurve Switch yl Module Installation Guide
for more information.
Go to: www.procurve.com/manuals
View or Download the Software Manual Set
The printed Installation and Getting Started Guide shipped with your ProCurve product describes installing,
minimally configuring, and troubleshooting. For further software feature and configuration information, visit
the ProCurve Web site, where you can view or download the latest software manuals for your product.
To do so, go to: www.procurve.com/manuals
You may want to bookmark this Web page
fo
r easy access in the future.
You can also register on the My ProCurve port
al to receive a set of ProCurve switch manuals on CD-ROM. To
register and request a CD go to www.procurve.com and click on My ProCurve Sign In. After
registering and entering
the portal, click on My Manuals.
Software Release K.11.01 or Later Is Required on Your Switch 3500yl and
6200yl
For installation information refer to the ProCurve Switch yl Module Installation Guide.
1