zl Modules Installation Guide 2011-11

3
HP Switch v2 zl Modules
HP 20-port Gig-T / 4-
port SFP v2 zl Module
(J9549A)
1
20 twisted-pair ports with RJ-45
connectors for 10/100/1000Base-T
and 4 ports for installing any of the
supported HP transceivers. All RJ-
45 ports have the IEEE 802.3ab
Auto MDI/MDI-X (HP Auto-MDIX)
feature. This module does not
support IEEE 802.3at PoE+.
HP 24-port Gig-T v2 zl
Module (J9550A)
1
24 twisted-pair ports with RJ-45
connectors for 10/100/1000Base-T
operation over Category 5 or better
100-ohm UTP or STP cable
(category 5e recommended for
Gigabit). All ports have the IEEE
802.3ab Auto MDI/MDI-X (HP
Auto-MDIX) feature.This module
does not support IEEE 802.3at
PoE+.
HP 12-port Gig-T / 12-
port SFP v2 zl Module
(J9637A)
1
12 twisted-pair ports with RJ-45
connectors for 10/100/1000Base-T
operation over Category 5 or better
100-ohm UTP or STP cable
(category 5e recommended for
Gigabit) and 12 ports for installing
any of the supported HP
transceivers. All RJ-45 ports have
the IEEE 802.3ab Auto MDI/MDI-X
(HP Auto-MDIX) featureand
support IEEE 802.3at PoE+.
For supported transceivers, visit
www.hp.com/networking/support.
– In the first textbox, type J4858 (for 100-Mb and Gigabit information), or J8436 (for 10-Gigabit information).
– Select any of the products that display in the dropdown list.
– Select Product support information. Then click on Manuals and find the Transceiver Support Matrix.
For technical details of cabling and technologies see "Cabling and Technology Information" on page 36
.
1
These modules require switch software version K.15.02 or greater on both the E5400 zl chassis and E8200 zl chassis.
2
This module requires switch software version K.15.04 or greater on both the E5400 zl chassis and E8200 zl chassis.
Contact your HP authorized networking products reseller or your HP networking representative for information on
availability of other modules. You can also visit the HP networking products Web site http://www.hp.com/networking
to get more information.
Module Description