HP MSM7xx Controllers Release Notes v6.3.0.
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Acknowledgements Windows® is a U.S.
Version: MSM v6.3.0.1 Description These release notes provide important release-related information. NOTE: In this document, except when identifying specific models, the generic term “controller” is used in place of MSM7xx Controller product names and the generic term “AP” is used in place of MSM3xx / MSM4xx / HP 425 Access Point product names.
NOTE: Due to a problem with AP channel use validation, a banner similar to this may appear at the top of the Home screen: AP CNxxxxxxxx, Radio 1 channel configuration has been set to autochannel because the previously configured channel is not supported by this version of software. The same message is added to the system log. These messages can be safely ignored.
and download instructions, consult the Guest Management Software (GMS) Release Notes. Search for “Guest Management Software” at www.hp.com/support/manuals. NOTE: GMS 6.3.0.x works with and is required for MSM software version 6.3.0.x. See also “GMS support for teaming” (page 5). RF Manager software and MSM software version compatibility RF Manager versions 5.9.x, 6.0.x, and 6.7.x work with MSM software version 5.5.x or later. However, to use the WLAN Integration feature in RF Manager 6.0.x or 6.7.
on a controller team. Automatic account removal due to Invalidity is supported on a controller team. • Maximum number of concurrent sessions not supported. Since this option is per controller, it is not supported in a team. This option is fixed at Unlimited for controller teams. Configuring the service controller in GMS (when teaming is used): • Do NOT configure a controller in GMS when the team manager controller is not available and a team member is temporarily taking its place.
Although enabled in MSM software release 6.2.0.0 or later, the following SOAP functions should not be used on a controller team. If you attempt to use any of these functions when teaming is enabled, an error is returned.
• (Applies to MSM422.) When an AP is configured to egress traffic on a given VLAN, the wireless clients connecting to the AP fail to receive an IP address from the external DHCP server. • (Applies to HP 425, MSM410, MSM422, MSM430, MSM460, MSM466, MSM466-R.) An access controlled VSC using MAC-based authentication with the MAC filtering ALLOW option enabled, allows clients to connect.
err pmmclient: setVLANSubsectionIndexFromVLANNetworkProfileName: Unknown vlan name 'LAN port network'. err pmmclient: DB: Unable to prepare the SQL statement. err pmmclient: Could not get data from the database. These messages can be safely ignored. • MTM is not supported when APs are adopted by controllers using NAT. • iPads/iPods/iPhones cannot authenticate using the secondary RADIUS server with the default configuration.
