MSM3xx/MSM4xx and HP 425 Access Points Release Notes v6.2.0.1

The HP 425 AP requires these minimum software versions for the indicated controller families as follows:
• MSM7xx: MSM v6.2.0.0
• HP 6000 and HP WX5004: CMW520-R2308P29
• HP 830: CMW520-R3308P29
RF Manager software and MSM software version compatibility
RF Manager versions 5.9.x, 6.0.x, and 6.7.x work with MSM software version 5.5.x and higher.
However, to use the WLAN Integration feature in RF Manager 6.0.x or 6.7.x, the RF Manager and
MSM software versions must be matched as follows:
Sensor devices versionCompatible RF Manager
versions
MSM7xx software version
AP/Sensor combo devices
(MSM320*, MSM325,
MSM335)
Sensor-only devices
(MSM415)
Upgraded automatically by
MSM7xx Controller.
Upgraded automatically by
RF Manager.
6.0.185, 6.7.769 or above6.2.0.0
6.0.177 or above5.7.1.x/5.7.2.0/6.0.0.1/6.0.1.x
6.0.162 or above5.7.0.2/5.7.0.3/5.7.0.4
6.0.157 or above5.5.3.x
6.0.154 or above5.5.1.x/5.5.2.x
5.9.203, 6.0.147 or above5.5.0.x
*MSM320 APs that have been upgraded to MSM325 RF sensor via HP MSM320 RF Sensor License
J9384A.
NOTE: Software version 6.2.0.0 is compatible with RF Manager 6.0.185 and 6.7.769, but the
MSM320, MSM325, and MSM335 sensors may appear orange and indicate that there is a version
mismatch. This is expected and the sensors will function normally. Note also, that with RF Manager
6.7.769, these sensors will function at an RF Manager 6.0.x feature level.
NOTE: If you choose to use mismatched software versions with RF Manager 6.0.177 or above, you
should first turn off the WLAN Integration in RF Manager.
NOTE: Upgrading an MSM7xx Controller to v6.2.0.0 will also automatically upgrade any MSM320,
MSM325, and MSM335 Sensors it manages to MSM software v6.2.0.0.
NOTE: The MSM415 Sensor has no MSM software dependency. It is managed and upgraded
directly by RF Manager.
Changes to the management tool interface
Recent management tool changes are highlighted in this section. For additional details, see the New
in release 6.2.0.0 section of the MSM3xx / MSM4xx APs Configuration Guide.
Validation added to the firmware updates page
Firmware signature validation has been added to the Maintenance > Firmware updates page enabling
administrators to check firmware integrity before installation.
RF Manager software and MSM software version compatibility 5