MSM7xx Controllers Release Notes v6.2.0.1

New page
LLDP settings
Transmit interval
Sets the interval (in seconds) at which local LLDP information is updated and TLVs are sent to
neighboring network devices.
Multiplier
The value of Multiplier is multiplied by the Transmit interval to define Time to live.
Time to live
Indicates the length of time that neighbors will consider LLDP information sent by this agent to be
valid. Time to live is calculated by multiplying Transmit interval by Multiplier.
Port Description TLV content
Select the content to be included in and advertised as part of the port description TLV.
• Interface friendly name: Use the friendly name for the interface (the name you see in the
management tool). For example: LAN port, Internet port.
• Interface internal name: Use the internal name for the interface. For example: eth0, eth1.
System name TLV content
Access Point Name
Use the name assigned to the AP as shown in the network tree. To change the name, select the
AP in the network tree and then select Device Management > AP management.
Dynamic Name
If the Generate dynamic system names option is enabled on the Controllers >> Network > Discovery
protocols page, the system name of the AP will be replaced with a dynamically generated name
that you define.
Changes to the management tool interface 7